VentoFresco

Complete nebulization and ventilation system, for all types of breeding farms

VentoFresco cools stables and farms by reducing heat stress that weakens and makes animals less productive. The animals general well-being increases their appetite and significantly decreases mortality rates. The results are: more milk, more meat, more eggs and more puppies.

VentoFresco is a complete nebulization and ventilation system, for all types of breeding farms.
VentoFresco is powered by the Fog 70 Extra, 80 bar pumping module, and generates a ventilated misting flow through an air circulator fan with an AISI 316 stainless steel ring, complete with anti-drip nozzles.

highlights

Esempio di configurazione

Stalla con 18 ventilatori (esempio)

Suggerimento di applicazione

Technical data

CODE	Model	FOG 70 EXTRA pump module, flow rate	Misting flow	Water inlet kit	H.p. outlet kit for 4 lines	Temperature probe	Humidity probe	H.p. polyamide pipe	Pipe quick coupling, “Tee”	Tube cutter

ZX.KV12-G	VENTOFRESCO	8l/min	12pz	1pz	1pz	1pz	1pz	2pz	11pz	1pz

ZX.KV18-G	VENTOFRESCO	11l/min	18pz	1pz	1pz	1pz	1pz	2pz	16pz	1pz

ZX.KV24-G	VENTOFRESCO	15l/min	24pz	1pz	1pz	1pz	1pz	3pz	22pz	1pz

ZX.KV30-G	VENTOFRESCO	18l/min	30pz	1pz	1pz	1pz	1pz	3pz	28pz	1pz

Technical data

- Possible scheduling of work-break cycles
- Stainless steel blades (much longer lasting than galvanized blades)
- The manifold can support the supply of multiple configurable and modular lines
- Support with X-shaped structure (greater robustness)
- System for easy motor disassembly
- Integrated humidistat and thermostat allow the system to activate autonomously under certain humidity and temperature conditions

Standard equipment

- FOG 70 EXTRA misting system pump, 3x400 W-50Hz, 70bar, professional pump, crankshaft, complete with timer, humidistat, thermostat and weekly programmer
- 51”circulator air, 230V50/60Hz, 1,1kW, 41306 M3/hDimension: 1380x1380x330mm Weight: 52Kg AISI 316 stainless steel ring, complete with anti-drip nozzles, AP filter and slip-lock connector for d. 9,6mm polyamide pipe
- 10” water inlet kit complete with pressure stabiliser, support bracket, 5 and 1mcr stringwound cartridges, connection hose, tightening spanner and spare cartridges (5+5 pcs)
- H.p. outlet kit for 4 lines, ø9,6mm complete with h.p. filter, shut-off valves, polyamide ø9,6mm tube and connection to fog modules
- Temperature probe, (for standard thermostat),with 20m cable
- Humidity probe 4:20mA, (for standard humidstat), with 20m cable
- H.p. polyamide pipe, ø9,6mm, rolls of 100m, black (max pressure 100bar at 23°C)
- Pipe quick coupling, “Tee”,in nickel-plated brass, ø9,6mm
- Tube cutter for polyamide pipe ø2-12mm

*see table above for quantity and flow rate of the pump module.

optionals / ZX.KV12-G